5060全讯白菜网大全-5060全讯彩金白菜-官网

当前位置: 5060全讯白菜网大全 - 资讯动态 > 行业资讯 >
行业资讯
联系大家

5060全讯白菜网大全

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


石膏粉生产线工艺先容!

来源: 日期:2019-06-18 发布人:admin

  石膏粉生产线成套设备包括DCS电气控制系统、除尘系统、管道供热系统、轧机系统、输送系统、原料破碎机、沸腾煅烧机等。

  The complete equipment of gypsum powder production line includes DCS electric control system, dust removal system, pipeline heating system, rolling mill system, conveying system, raw material crusher, boiling calciner, etc.
  石膏粉生产线DCS系统是目前先进的控制系统。其主要优点是:可靠性高、危险性分散、易膨胀、控制功能强、配置灵活、操作管理集中、人机界面友好。广泛应用于石油化工、电力、建材等行业。
  The DCS system of gypsum powder production line is an advanced control system at present. Its main advantages are: high reliability, dispersed risk, easy expansion, strong control function, flexible configuration, centralized operation and management, friendly man-machine interface. It is widely used in petrochemical, electric power, building materials and other industries.
  石膏粉生产线原料破碎工艺:石膏块体次由粗颚式破碎机破碎,分布在卸料区,第二次由细颚式破碎机破碎,送入料仓。在此过程中,严禁粗颚式破碎机带负荷起动,停止报警信号;卸料区分为两个卸料区,卸料车应自由切换,物料分布均匀。石膏粉生产线预磨:筒仓中的石膏粉用螺杆量取,带机进入柱磨机进行进一步磨粉,再用分离器进行分离。合格物料由角螺杆输送机、立斗提升机、顶螺杆输送机运至面粉仓。在此过程中,用定值法测量螺旋,计算累计输出。柱磨机也不能带负荷启动,并需要测试电流;由库存水平信号来选择仓库进料。
5060全讯彩金白菜
  Crushing process of raw material in gypsum powder production line: gypsum block is crushed by coarse jaw crusher for the first time, distributed in the discharge area, and broken by fine jaw crusher for the second time, and sent to the silo. In this process, it is strictly forbidden to start with load and stop alarm signal of rough jaw crusher; unloading area is divided into two unloading areas, unloading truck should switch freely and material distribution is even. Pre-grinding of gypsum powder production line: The gypsum powder in silo is measured by screw, and is further grinded by a column mill with a belt conveyor, then separated by a separator. Qualified materials are transported from angle screw conveyor, bucket hoist and top screw conveyor to flour bin. In this process, the helix is measured by the fixed value method and the cumulative output is calculated. The column mill can not start with load, and needs to test the current; the stock level signal is used to select the warehouse feed.
  石膏粉生产线设备主要是石膏粉沸腾炉。石膏粉沸腾炉是利用流化技术煅烧石膏的专用设备。其加热介质为烟或导热油。流化床加热炉特点:
  The equipment of gypsum powder production line is mainly gypsum powder boiling furnace. Gypsum powder boiling furnace is a special equipment for calcining gypsum by fluidization technology. The heating medium is smoke or heat conducting oil. Characteristics of Fluidized Bed Heating Furnace:
  1)体积小,生产能力大。
  1) Small size and large production capacity.
  2)结构简单,不易损坏。
  2) It has simple structure and is not easy to be damaged.
  3)设备紧凑,占地面积小。
  3) Compact equipment and small area.
  4)低能耗。
  4) Low energy consumption.
  5)操作和控制方便。
  5) Easy to operate and control.
  6)节省基建投资,降低运营成本。
  6) Save capital investment and reduce operating costs.

???